The Flanagan Collective

DIY Carpet Cleaning – To Shampoo or Not to Shampoo?

Save for the obvious regular maintenance of vacuuming twice or even thrice a week and spot treating every now and then, carpets definitely need a thorough deep cleaning every now and then to look and smell good.

Using shampoos designed specifically for carpets is a great way to remove all the dirt, grime, dust and other contaminants that have settled deep inside carpets. Such products can also help remove stubborn stain, all the while helping making your carpet look as good as new.

How Shampooing Works

If your carpet is starting to give off an undesirable smell and starting to look like it’s seen better days, the use of a high-quality carpet shampoo can help spice things up.

Quality carpet shampoos, as opposed to cheap ones, generate far more foam if used properly. As this foam dries up, it attracts all sorts of contaminants such as dirt and soils, thus helping them loosen off of the carpet fibre.

Once the foam dries up, the residue is vacuumed up along with the loosened dirt.

The Problem With Shampooing

Using carpet shampoos to deep clean your carpets, while effective, is not without its faults.

For starters, not everyone is willing to invest in a slightly more expensive, high-quality carpet shampoo. Most are content with just buying the cheapest one that money can get, thinking that it’s enough.

If you’re in the market for carpet shampoos, remember these following things.

·         Go for the ones that have the seal of approval from accrediting bodies such as the Carpet and Rug Institute.

 

·         High foam levels are important as well as they help reduce over wetting the carpet and prevents excess moisture that promotes the growth of mould and mildew.

 

·         High lubricity is also another property to take note of as it helps reduce the damage done to the carpet as a result of brushing during the cleaning process.

 

·         Non-sticky and dry residue is also an important factor for the same reason as you’d want a shampoo with high foam levels.

Aside from using the low quality shampooing, another problem that homeowners often face, especially when they do they deep clean their own carpets is that they don’t know how to do it right.

They think that all they have to do is apply the carpet shampoo, let it “work its magic”, rent any carpet shampoo machine they can find and voila, their carpet will look as good as new. But no, that’s not the case.

In particular, you just can’t rent any carpet shampoo machine. You have to make sure that it’s powerful enough to remove all the shampoo’s entire residue when it’s all said and done. This is because if it doesn’t remove it all, the brighteners found in the shampoo will fade and leave a yellow cast over the carpet.

Also, before you even start the whole deep cleaning process, you have to treat and stains first with a stain remover and leave it to dry.

As you can see, choosing to shampoo your carpets yourself isn’t easy, especially if you want to do it right. But, it does save you a lot of cash, which is a good thing.

Still, if you’re willing to spend money, or simply want to know how the pros go about doing it, feel free to hire a carpet cleaner to deep clean your carpet for you every year. A company like Bliss Cleaning provides carpet cleaning services in London and the South East.